MCTRL R5
Sender / controller · MCTRL
- Capacity4.15 MP
- Outputs8 × RJ45
- Max. width3,840 px
- ModeSynchronous
Official product image — source: NovaStar.
NovaStar · Receiving card
DH7512-S
Fully verified
DH Series Manufacturer class: Receiving Card
The DH7512-S is a general receiving card from NovaStar with 12 standard HUB75E connectors and up to 24 groups of parallel RGB data. The maximum load capacity per card is 512×384@60Hz for common driver ICs and 512×512@60Hz for PWM driver ICs.
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 196.6 K px
- Area
- 512×384
- Data groups
- 24
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
Best suited for
- Driving a cabinet or module group of up to 512 × 384 pixels with a single card.
- Permanent installations that need temperature / voltage monitoring.
Key features (manufacturer)
- Maximum load capacity per card: 512×384@60Hz (common driver ICs), 512×512@60Hz (PWM driver ICs)
- 12 standard HUB75E connectors; up to 24 groups of parallel RGB data
- Brightness calibration of each pixel, quick adjustment of dark or bright lines, multi-batch adjustment
- 3D output with a controller that supports 3D; individual gamma adjustment for RGB
- Image rotation in multiples of 90° (0°/90°/180°/270°)
- Mapping 1.1, temperature and voltage monitoring, cabinet LCD, bit error detection
- Firmware program readback and configuration parameter readback
- Loop backup and dual program backup
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 196,608 px.This figure is for modules with conventional driver chips; the datasheet states 262,144 px for modules with PWM driver chips.
Technical specifications
- Backup / redundant line
- Pixel calibration
- Mapping
- Monitoring (temperature / voltage)
Capacity and outputs
- Loading capacity
- 196,608 px
- Official loading area
- 512 × 384 px
- Port speed
- 1 Gbps
- Data groups
- 24
- HUB interface
- HUB75E ×12
Connectivity and software
- Software / platform
- NovaLCT
Physical
- Dimensions
- 145.6mm × 91.5mm × 19.1mm
- Weight
- 93.1 g
- Operating temperature
- -20°C to +70°C
- Input voltage
- DC 3.8 V to 5.5 V
- Power consumption
- 2.5 W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Maximum load capacity per card (common driver ICs)
-
512×384@60Hz
- Maximum load capacity per card (PWM driver ICs)
-
512×512@60Hz
Network
- Gigabit Ethernet ports
-
- Connect to the sending card, and cascade other receiving cards.
- Each connector can be used as input or output.
Interfaces
- HUB75E connectors
-
- 12 standard HUB75E connectors
- connect to the module
- Parallel RGB data
-
Up to 24 groups
- 5-pin LCD connector
-
Connect to the LCD
Control
- Backup
-
Loop backup, dual program backup
- Monitoring
-
- Temperature and voltage monitoring without external devices
- cabinet LCD
- bit error detection
- Mapping
-
Mapping 1.1: cabinets display the controller number, receiving card number and Ethernet port information
- Readback
-
Firmware program readback and configuration parameter readback
- Self-test button
-
Sets the test pattern after the Ethernet cable is disconnected
- Certifications
-
RoHS, EMC Class A
Display
- Brightness calibration
-
Works with NovaStar's calibration system to calibrate the brightness of each pixel
- Multi-batch adjustment
-
Adjusts the brightness of cabinets or modules to minimize discrepancies between production batches
- 3D
-
Works with the controller that supports 3D function to enable 3D output
- Individual gamma adjustment for RGB
-
With NovaLCT and a controller that supports this function: individual red, green and blue gamma adjustment
- Image rotation
-
Multiples of 90° (0°/90°/180°/270°)
Electrical
- Input voltage
-
DC 3.8 V to 5.5 V
- Rated current
-
0.5 A
- Rated power consumption
-
2.5 W
Physical
- Operating environment
-
- -20°C to +70°C
- 10% RH to 90% RH, non-condensing
- Storage environment
-
- -40°C to +85°C
- 0% RH to 95% RH, non-condensing
- Dimensions
-
145.6mm × 91.5mm × 19.1mm
- Net weight
-
93.1 g (single receiving card only)
- Packing
-
- Blister pack
- 100 receiving cards per packing box
- box 625.0 mm × 180.0 mm × 470.0 mm
Sources
Source note
Capacity is recorded for common driver ICs (512×384@60Hz); with PWM driver ICs the stated maximum is 512×512@60Hz.
Dataset: 2026.10.12-1 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
NovaStar controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
MCTRL600
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs4 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL660 PRO
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL700
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
Alternatives in the same category
