AT30

Manufacturer: NovaStar

Fully verified AT Series Manufacturer class: Receiving Card

General small receiving card developed by NovaStar. A single AT30 loads up to 512×256 pixels and uses high-density connectors, supporting up to 32 groups of parallel RGB data or 64 groups of serial data (expandable to 128 groups).

Price A quote tailored to your project

The price is provided with the quote, based on quantity, delivery address and project scope.

The price of this product is set by quote. Add it to your cart and request the quote together.

Design a solution with this manufacturer

Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
Compatibility checkCompatibility with the other components is checked during configuration.
Order trackingShipping and installation status is tracked on your order page.

Key specifications

View Technical Details

Capacity: 131.1 K px
Area: 512×256
Data groups: 32

Planning a complete display?Let's calculate the system that works with this device together. Calculate

Best suited for

Driving a cabinet or module group of up to 512 × 256 pixels with a single card.
Permanent installations that need temperature / voltage monitoring.

Key features (manufacturer)

Loads up to 512×256 pixels per card
Up to 32 groups of parallel RGB data or 64 groups of serial data (expandable to 128 groups of serial data)
High-density connectors for communication, limiting the effects of dust and vibration
Pixel level brightness and chroma calibration with NovaLCT and NovaCLB
Quick adjustment of dark or bright lines, 3D function, individual Gamma adjustment for RGB, image rotation in 90° increments
Mapping function, temperature and voltage monitoring, bit error rate monitoring, cabinet LCD
Loop backup, dual card backup, dual power supply status detection, dual backup of configuration parameters and application program
EMC Class B compliant hardware design; 70.0 mm × 45.0 mm × 9.0 mm, 17.2 g

Capacity and loading area

The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 131,072 px.

Technical specifications

Backup / redundant line
Pixel calibration
Mapping
Monitoring (temperature / voltage)

Capacity and outputs

Loading capacity: 131,072 px
Official loading area: 512 × 256 px
Port speed: 1 Gbps
Data groups: 32
HUB interface: High-density connectors ×2 (JH1, JH2)

Connectivity and software

Software / platform: NovaLCT, NovaCLB

Physical

Dimensions: 70.0 mm × 45.0 mm × 9.0 mm
Weight: 17.2 g
Operating temperature: -20°C to +70°C
Input voltage: DC 3.3 V to 5.5 V
Power consumption: 2.5 W

Manufacturer-specific technical data

In the manufacturer's own wording (the original English terms are kept).

Capacity

Maximum loading capacity: 512 × 256 pixels
Parallel RGB data groups: Up to 32 groups of parallel RGB data
Serial data groups: 64 groups of serial data (expandable to 128 groups of serial data)

Network

Ethernet ports: 2 Gigabit Ethernet ports (Port1, Port2) on connector JH2

Interfaces

Connectors: High-density connectors JH1 and JH2 (84 pins each in the pin tables)

Control

Smart module: Supported (dedicated firmware required): module ID management, calibration coefficient storage, module temperature/voltage/flat cable status monitoring, LED error detection
LVDS transmission: Supported (dedicated firmware required)
Monitoring: Receiving card temperature and voltage monitored without peripherals

bit error rate monitoring (NovaLCT V5.2.0 or later)
Backup: Dual card backup, loop backup, dual power supply status detection, dual backup of configuration parameters and application program

Display

Calibration: Pixel level brightness and chroma calibration (with NovaLCT and NovaCLB)
3D function: Supports 3D image output when working with a sending card that supports 3D
Individual Gamma adjustment for RGB: Supported with NovaLCT V5.2.0 or later and a sending card that supports this function
Image rotation: Multiples of 90° (0°/90°/180°/270°)

Electrical

Input voltage: DC 3.3 V to 5.5 V
Rated current: 0.5 A
Rated power consumption: 2.5 W

Physical

Operating temperature: -20°C to +70°C
Operating humidity: 10% RH to 90% RH, non-condensing
Storage temperature: -25°C to +125°C
Storage humidity: 0% RH to 95% RH, non-condensing
Dimensions: 70.0 mm × 45.0 mm × 9.0 mm
Board thickness: Board not greater than 2.0 mm

total thickness not greater than 9.5 mm
Net weight: 17.2 g
Packing: Antistatic bag and anti-collision foam per card

40 receiving cards per box

box 378.0 mm × 190.0 mm × 120.0 mm
Certifications: RoHS, EMC Class B

Sources

Source note

Smart module support and LVDS transmission require dedicated firmware.

AT30 Specifications V1.0.3 Official specification · V1.0.3 · Read directly · 07.10.2026
Official product image — AT30 (AT30 Specifications V1.0.3) Official specification · V1.0.3 · Read directly · 07.10.2026

Dataset: 2026.10.12-1 · last verified: Oct 6, 2026

Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.

NovaStar controllers from the same ecosystem

System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.

NovaStar