HD-T16
Sender / controller · T Series
- Capacity8.84 MP
- Outputs16 × RJ45
- Max. width8,192 px
- ModeSynchronous
Official product image — source: Huidu.
Huidu · Receiving card
HD-R5S
Fully verified
R5 Series Manufacturer class: Receiving Card
Small-size receiving card for LED transparent screen and fine pixel pitch LED screen control that can be cascaded with any Huidu sending card. The overview states control of 256*512 pixels per card; the parameter table recommends 98,304 pixels (128*768).
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 98.3 K px
- Area
- 128×768
- Data groups
- 32
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
- Start comparing
- Official product page
- Official specification / manual (V1.1) opens from the manufacturer's page
Best suited for
- Driving a cabinet or module group of up to 128 × 768 pixels with a single card.
Key features (manufacturer)
- Recommended control range 98,304 pixels (128*768); the overview states 256*512 pixels per card
- 32 groups of parallel data or 64 groups of serial data
- 120PIN*2 data interface (JH1, JH2) connected with the transfer board
- Supports any scanning method from static to 1/64, with extraction and empty point setting
- Supports transparent screen modules for all normal chips and mainstream PWM chips
- Gigabit Ethernet port
- Gray scale 256~65536 (adjustable)
- Receiving cards can be sorted arbitrarily and are synchronized in nanoseconds
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 98,304 px.
Technical specifications
Capacity and outputs
- Loading capacity
- 98,304 px
- Official loading area
- 128 × 768 px
- Port speed
- 1 Gbps
- Data groups
- 32
- HUB interface
- 120PIN ×2
- Max. scan
- 1/64
Physical
- Dimensions
- 70 × 45 (front-view dimension drawing, unit not printed)
- Weight
- 0.016 kg
- Operating temperature
- -40℃~80℃
- Input voltage
- DC 4.2V-5.5V
- Power consumption
- 5W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Loading capacity (Overview)
-
A single card supports control of 256*512 pixels
- Control range
-
Recommend: 98,304 pixels (128*768)
- Data groups
-
- 32 groups of parallel data
- 64 groups of serial data
Network
- Communication
-
Gigabit Ethernet port
- Communication distance
-
Super category 5, Super category 6 network cable within 80 meters
Interfaces
- Port
-
- 120PIN*2
- data signal transfer interface (JH1, JH2), connected with the transfer board
- Indicator light
-
- RUN light flashes when the card is working normally
- D2 network light flashes fast when the net cable is connected well and the card is working normally
Control
- With sending card
-
Dual-mode sending box, asynchronous sending card, synchronous sending card, video processor of VP series
- Multiple cards cascaded
-
Receiving cards can be arbitrarily sorted, synchronized in nanoseconds
- Smart setting
-
- A few simple steps to complete the smart setting
- the display module can be matched with any wiring mode through the screen body routing setting
Display
- Module type
-
Supports transparent screen modules for all normal chips and mainstream PWM chips
- Scan mode
-
Support any scanning method from static to 1/64, support extraction and empty point setting
- Gray scale
-
Support 256~65536 (adjustable)
Electrical
- Input voltage (Parameters table)
-
4V-6V
- Rated voltage (Technical Parameters)
-
DC 4.2V-5.5V
- Power
-
5W
Physical
- Dimension drawing
-
70 × 45 (front view, unit not printed)
- Net weight
-
0.016 kg
- Working temperature
-
-40℃~80℃
- Working environment humidity
-
0~95%RH
Sources
Source note
Compiled from the official specification HD-R5S V1.1. The document contradicts itself on capacity: the overview says a single card supports control of 256*512 pixels, the parameter table recommends 98,304 pixels (128*768); the lower, recommended figure is recorded as the loading rectangle and both statements are kept in the specifications. No separate figures for conventional and PWM driver ICs are printed. Input voltage is printed as 4V-6V in the parameter table and as rated voltage DC 4.2V-5.5V in the technical parameters; the narrower range is recorded. The parameter table states the power as 5W. The dimensions are read from the dimension drawing, which prints no unit.
- HD-R500S/R5s Plus/R5S/RB6/R507T
- PRODUCT SPECIFICATION Receiving Card HD-R5S V1.1
- Official product image — HD-R5S (PRODUCT SPECIFICATION Receiving Card HD-R5S V1.1)
Dataset: 2026.10.12-1 · last verified: Oct 7, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
Huidu controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
HD-T08
Sender / controller · T Series
- Capacity5.2 MP
- Outputs8 × RJ45
- Max. width8,192 px
- ModeSynchronous
HD-T902x2
Sender / controller · T Series
- Capacity5.2 MP
- Outputs8 × RJ45
- Max. width7,680 px
- ModeSynchronous
HD-T902x1
Sender / controller · T Series
- Capacity2.6 MP
- Outputs4 × RJ45
- Max. width3,840 px
- ModeSynchronous
Alternatives in the same category
