Official product image — source: Colorlight.
Official interface picture — source: Colorlight. Open the picture at full size
Colorlight · Video controller
X40m
X40m is a controller with video input and processing capacity that supports 4K inputs through DP 1.2 and HDMI 2.0 connectors and 2K inputs through HDMI 1.4 and DVI connectors. A single unit has a loading capacity of 26.21 million pixels and is equipped with 40 Gigabit Ethernet ports and 4×10G optical fiber ports.
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 26.21 MP
- Outputs
- 40 × RJ45
- Max. width
- 16,384 px
- Mode
- Synchronous
- Start comparing
- Official product page
- Official specification / manual (V1.1) opens from the manufacturer's page
Best suited for
- Synchronous installations where a PC or live HDMI/DVI source is shown one-to-one on the display.
- Displays with a total load of up to 26,210,000 px (40 Ethernet outputs).
Key features (manufacturer)
- Input up to 4096×2160@60Hz; 4K inputs: 1× DP1.2, 1× HDMI2.0; 2K inputs: 2× HDMI1.4, 2× DVI
- Maximum loading capacity 26.21 million pixels; maximum 16384 pixels in width or 8192 pixels in height
- 40 Gigabit Ethernet ports output or 4×10 Gigabit optical ports output (not usable at the same time)
- One network port load capacity 655360 pixels; redundant backup supported
- Up to 6-window display, 1 layer per window; free window moving, cropping and seamless switching
- U-DISK interface (1× USB3.0) for playing photos and videos, up to 4096×2160@60Hz
- 128 scene parameters can be saved and recalled
- Control via USB (with cascading), RS232, LAN port (TCP/IP) and Android APP
Capacity and network topology
- Total capacity
- 26,210,000 px
- Per port
- 655,360 px
- Max. width × height
- 16,384 × 8,192 px
- Operating mode
- Synchronous
Technical specifications
- Backup / redundant line
- LAN
- USB playback
Capacity and outputs
- Loading capacity
- 26,210,000 px
- Maximum width
- 16,384 px
- Maximum height
- 8,192 px
- Ethernet outputs
- 40
- Capacity per port
- 655,360 px
- Port speed
- 1 Gbps
Inputs and playback
- HDMI inputs
- 3
- DVI inputs
- 2
- Input interfaces
- DP 1.2 ×1, HDMI 2.0 ×1, HDMI 1.4 ×2, DVI ×2, USB 3.0 (U-DISK) ×1
- Max. decoding resolution
- 4096×2160@60Hz
- Video codecs
- MPEG-1/2, MPEG-4, H.264/AVC, H.265/HEVC, GOOGLE VP8, MOTION JPEG
- Color depth
- 8 bit
Physical
- Dimensions
- 482.6mm (19") × 133.3mm (5.3") ×385.0mm (15.2"), w/o foot pad.
- Weight
- 6.10kg (13.45lbs)
- Operating temperature
- -20°C~65°C (-4°F~149°F)
- Input voltage
- AC100-240V, 2.6A, 50/60Hz
- Power consumption
- 85W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Maximum loading capacity
-
26.21 million pixels
- One network port load capacity
-
655360 pixels
- Maximum width / height
-
Maximum 16384 pixels in width or 8192 pixels in height
Inputs
- Maximum input
-
Maximum 4096×2160@60Hz
- Input interfaces
-
- 4K input interface 1× DP1.2, 1× HDMI2.0
- 2K input interface 2× HDMI1.4, 2× DVI
- U-DISK interface
-
1× USB3.0
- HDMI 2.0 / DP 1.2
-
- Maximum 4096×2160@60Hz, maximum pixel clock 600MHz
- customized resolution up to 8192 pixels in width or in height
- EDID settings
- audio input
- HDMI 1, HDMI 2 (HDMI1.4)
-
- Maximum 1920×1200@60Hz, maximum pixel clock 165MHz
- customized resolution up to 4096 pixels in width or in height
- EDID settings
- audio input
- DVI 1, DVI 2
-
- Support 1920×1200@60Hz, maximum pixel clock 165MHz
- customized resolution up to 4096 pixels in width or in height
- EDID settings
Outputs
- Ethernet / optical outputs
-
- 40 Gigabit Ethernet ports output or 4×10 Gigabit optical ports output
- Ethernet port output and optical port output cannot be used at the same time
- FIBER 1-4
-
- 4×10G optical interfaces
- FIBER 1/2/3/4 correspond to PORT 1-10 / 11-20 / 21-30 / 31-40
- 10G single-mode optical module purchased separately, dual LC, 1310nm, 2 km
- 3D
-
4-pin S terminal connector, output 3D sync signal (optional, for use with active 3D glasses)
Network
- Redundancy
-
Support redundant backup
Control
- Control interfaces
-
- LAN (RJ45, connect to a switch for accessing local area network)
- RS232 via RJ11 (6P6C)
- USB IN (USB2.0 Type B, PC debugging)
- USB OUT (USB2.0 Type A, cascading)
- Control methods
-
- USB port for control and cascading
- RS232 protocol
- LAN port for TCP/IP control
- Android APP for phones and tablets
Display
- Signal format
-
- HDMI2.0, DP1.2, DVI, HDMI 1.4 YCbCr 4:2:2 and YCbCr/RGB 4:4:4, 8bit
- frame rates 23.98, 24, 25, 29.97, 30, 50, 59.97, 60, 120, 144, 200, 240
Windows
- Windows
-
- Up to 6-window display, 1 layer per window
- with one 4K input it can also support four 2K inputs
- with two 4K inputs only 2 windows can be opened
- window size at least 64×64
Decoding
- U-disk video
-
- Files 3GP, AVI, FLV, M4V, MKV, MP4, TP, TS, VOB, WMV, MPEG
- encoding MPEG-1 / 2, MPEG-4, H.264/AVC, H.265/HEVC, GOOGLE VP8, MOTION JPEG
- maximum 4096×2160@60Hz
- U-disk images / drive format
-
- JPEG, BMP, PNG, WEBP, GIF, maximum image 4096×2160
- drive format NTFS, FAT32, exFAT
Modes
- Scenes
-
128 scene parameters can be saved and recalled
Electrical
- Power
-
- Power input AC100-240V, 2.6A, 50/60Hz
- rated power 85W
Physical
- Dimensions (W×H×D)
-
- Unboxed 482.6mm (19") × 133.3mm (5.3") ×385.0mm (15.2"), w/o foot pad
- boxed 560.0mm (22.1") × 240.0mm (9.5") × 480.0mm (18.9")
- Weight
-
- Net weight 6.10kg (13.45lbs)
- total weight 8.80kg (19.40lbs)
- Operating environment
-
- -20°C~65°C (-4°F~149°F)
- 0%RH~80%RH, no condensation
- Storage environment
-
- -30°C~80°C (-22°F~176°F)
- 0%RH~90%RH, no condensation
Sources
3D display is "purchase separately"/optional and OSD is marked optional; precision color management needs specific receiving cards. Power input is printed with full-width commas ("AC100-240V,2.6A,50/60Hz").
- X40m/X20m
- X40m/X20m - Colorlight
- X40m Specification V1.1
- Official product image — X40m
- Official ports view — X40m (X40m Specification V1.1)
Dataset: 2026.10.09-2 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
Colorlight receiving cards from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
Alternatives in the same category
X26m
Video controller · X Series
- Capacity17.03 MP
- Outputs26 × RJ45
- Max. width16,384 px
- ModeSynchronous
X20m
Video controller · X Series
- Capacity13.1 MP
- Outputs20 × RJ45
- Max. width16,384 px
- ModeSynchronous
X16E
Video controller · X Series
- Capacity10.48 MP
- Outputs16 × RJ45
- Max. width16,384 px
- ModeSynchronous